A melee diamond size chart converts small diamond diameters in millimeters into approximate carat weights and stone counts. It also helps buyers understand sieve-size classifications used for sorting melee diamonds. For round stones, a 1.0 mm diamond weighs approximately 0.005 carats, while a 2.0 mm diamond weighs roughly 0.03 carats. Actual weights vary with cutting proportions.
A difference as small as 0.10 mm can change the fit of a small diamond in a jewelry setting. That little bit of variance can be a headache for manufacturers who produce hundreds of identical pieces in terms of stone matching, setting accuracy and production consistency.
A melee diamond size chart can help you avoid these problems by connecting three important measurements: diameter in millimetres, approximate carat weight and sieve-size classification.
Melee diamonds are generally defined as diamonds under 0.20 carats. They are frequently found in pavé settings, halo settings, eternity bands and intricate designs. jewelry Because each stone is small, it’s especially important to size accurately when you want a lot of matching diamonds in a design.
For diamond wholesalers, jewelry manufacturers and sourcing professionals, a melee diamond size chart is much more than a handy conversion reference. It supports parcel planning, calculating stone count, organising inventory and production specifications.
It also helps buyers avoid a common misconception: two diamonds of the same diameter don’t necessarily have the same carat weight.
Being aware of this difference makes it easier to compare parcels, communicate requirements to suppliers and order appropriately calibrated stones.
A Melee Diamond Size Chart Explained
A melee diamond size chart is a technical reference that compares the approximate diameter, weight and quantity of small polished diamonds.
It usually has three measurements:
- Millimetres (mm): Physical measurement of a round diamond’s diameter.
- Carat weight (ct): The weight of the diamond. 1 carat = 200 milligrams.
- Sieve size: A sorting classification based upon the size of openings used in separating diamonds.
The size chart for melee is usually about round brilliant melee. This is because round brilliant melee can be sorted by using one diameter measurement.
Fancy-shaped diamonds need extra measurements, such as length, width and sometimes depth.
These measurements serve different purposes for buyers comparing loose diamonds. The diameter determines if the stone will fit in the setting, while the carat weight determines the total material weight of the order.
A melee diamond size chart aggregates those dimensions without considering them to be interchangeable.
Melee Diamond Size Conversion Chart: MM to Carat
The following melee diamond size chart gives approximate conversions for round polished diamonds.
| Diamond Diameter (MM) | Estimated Carat Range | Approx. Stones Per Carat |
| 0.70 mm | 0.0015 to 0.0020 ct | 500 to 667 |
| 0.80 mm | 0.0020 to 0.0030 ct | 333 to 500 |
| 0.90 mm | 0.0030 to 0.0040 ct | 250 to 333 |
| 1.00 mm | 0.0040 to 0.0050 ct | 200 to 250 |
| 1.10 mm | 0.0050 to 0.0060 ct | 167 to 200 |
| 1.20 mm | 0.0060 to 0.0080 ct | 125 to 167 |
| 1.30 mm | 0.0080 to 0.0100 ct | 100 to 125 |
| 1.40 mm | 0.0100 to 0.0120 ct | 83 to 100 |
| 1.50 mm | 0.0120 to 0.0150 ct | 67 to 83 |
| 1.60 mm | 0.0150 to 0.0190 ct | 53 to 67 |
| 1.70 mm | 0.0180 to 0.0230 ct | 43 to 56 |
| 1.80 mm | 0.0220 to 0.0270 ct | 37 to 45 |
| 2.00 mm | 0.0300 to 0.0350 ct | 29 to 33 |
| 2.20 mm | 0.0400 to 0.0480 ct | 21 to 25 |
| 2.50 mm | 0.0550 to 0.0650 ct | 15 to 18 |
| 3.00 mm | 0.0900 to 0.1100 ct | 9 to 11 |
These values are not fixed weights but reference estimates. The actual weights depend on the depth, girdle thickness and overall proportions of the individual diamond.Note: Values are rounded estimates for typical proportions of round brilliants. The number of stones per carat is not fixed. It is determined by the weight distribution of a parcel. Some larger sizes may be outside the commercial definition of melee for certain suppliers.
How to Use the MM to Carat Chart
Assume a jewellery design requires 1.50 mm round diamonds.
The size of the melee diamonds is about 0.015 carats, according to the melee diamond size chart. If the stones are of similar weights, this means that a parcel of 1 carat would contain about 67 stones.
But actual diameters should still be checked before production by the setting manufacturer.
A related useful reference is the diamond carat to MM chart, which explains the relationship between carat weight and physical dimensions.
Why the Same Diameter Can Have Different Weights
Carat weight is a measure of mass, and millimeters measure dimensions.
Two 1.50 mm diamonds may have different girdle thicknesses or pavilion depths. Even if both measure the same diameter, there could be more material beneath one’s visible surface.
That is why the diamond size chart for melee should be seen as an estimate and not an exact weight guarantee.
Melee Diamond Sieve Size Chart Explained
A melee diamond sieve size chart explains the relationship between diamond sorting categories and physical measurements.
Sieve sorting is a common method used to process large volumes of small diamonds.
A diamond sieve is a metal plate with holes of precisely sized diameters. The dimensions and orientation of the stones determine whether they pass through the openings or remain above them.
Multiple sieve plates allow you to break up mixed parcels into narrower size groups.
Sieve numbers are not consistent across all manufacturers, unlike millimetre measurements. Different trade systems can give different numbers to similar diameter ranges.
Diamond Sieve Size Chart: Sorting Bands
| Diamond Sieve Grade | Calibrated Diameter (MM) | Reference Weight (CT) | Approx. Stones Per Carat |
| 000-0 | 0.90 to 1.10 | 0.005 | 200 |
| 0-1 | 1.10 to 1.15 | 0.006 | 167 |
| 1-1.5 | 1.15 to 1.20 | 0.007 | 143 |
| 1.5-2 | 1.20 to 1.25 | 0.008 | 125 |
| 2-2.5 | 1.25 to 1.30 | 0.009 | 111 |
| 2.5-3 | 1.30 to 1.35 | 0.010 | 100 |
| 3-3.5 | 1.35 to 1.40 | 0.011 | 91 |
| 3.5-4 | 1.40 to 1.45 | 0.012 | 83 |
| 4-4.5 | 1.45 to 1.50 | 0.013 | 77 |
| 4.5-5 | 1.50 to 1.55 | 0.014 | 71 |
| 5-5.5 | 1.55 to 1.60 | 0.016 | 63 |
| 5.5-6 | 1.60 to 1.70 | 0.018 | 56 |
| 6-6.5 | 1.70 to 1.80 | 0.021 | 48 |
| 6.5-7 | 1.80 to 1.90 | 0.025 | 40 |
| 7-7.5 | 1.90 to 2.00 | 0.029 | 34 |
| 7.5-8 | 2.00 to 2.10 | 0.035 | 29 |
| 8-8.5 | 2.10 to 2.20 | 0.039 | 26 |
| 8.5-9 | 2.20 to 2.30 | 0.044 | 23 |
| 9-9.5 | 2.30 to 2.40 | 0.052 | 19 |
| 9.5-10 | 2.40 to 2.50 | 0.058 | 17 |
These are diameter sorting bands, not universal numbered sieve codes. Buyers should request the actual conversion table of aperture to sieve numbers from the supplier.
Why Sieve Number Alone Isn’t Enough
A supplier may describe diamonds in terms of sieve size, but a Jewelry may want millimeter dimensions.
If the actual size of the opening is not confirmed, the two parties may interpret the order differently.
Therefore, the melee diamond size chart should always be used in conjunction with written specifications in mm.
In the case of a production order, a clear request will outline the desired diameter range, quantity, total weight and acceptable tolerances.
This reduces ambiguity and improves consistency across multiple parcels.
Star Melee Diamond Size Chart: Interpreting Very Small Diamonds
A star melee diamond size chart is all about the particularly small diamonds used for fine details in jewelry.
The term star melee is a trade term, not a universally standardised measurement category. You can have different size boundaries from suppliers.
A star melee diamond size chart could include stones smaller than about 0.01 carat, but consumers shouldn’t expect all sellers to agree on the same definition.
| Diameter (mm) | Approximate Carat per Stone | Approximate Stones per Carat |
| 0.70 | 0.002 ct | 500 |
| 0.80 | 0.003 ct | 333 |
| 0.90 | 0.004 ct | 250 |
| 1.00 | 0.005 ct | 200 |
| 1.10 | 0.006 ct | 167 |
| 1.20 | 0.008 ct | 125 |
These smaller stones are often used for fine pavé work and delicate accent settings.
One thing to keep in mind when comparing star melee is that size consistency can be as important as individual weight. Small setting variations become visible across repeated patterns.
Melee Diamond Weight and Stone Count Calculations
A melee diamond size chart also helps buyers estimate the number of diamonds to be used for a jewelry manufacturing order.
Estimate Total Carat Weight
Use the formula below:
Total Carats = Number of Stones × Carats per Stone
For example, a production order requires 150 round diamonds of approximately 1.50 mm.
Assuming an estimated weight of 0.015 carats per diamond:
1500.015=2.25ct
Total weight is estimated at 2.25 carats.
Approximate Stones Per Carat
The reverse calculation is:
StonesperCarat=1AverageCaratWeight
For a 0.020 carat diamond:
10.020=50
The estimated amount is 50 stones per carat.
These calculations can serve as a starting point in inventory and purchase planning. But the actual parcel counts should be checked by weighing and sorting.
The Importance of Correct Melee Diamond Sizing in jewelry Production
A melee diamond size chart links procurement decisions to the technical needs of jewelry manufacturing.
Pavé and Micropavé Settings
Diamonds are set closely together in pavé settings.
Uniform diameters help to produce an even pattern and avoid unnecessary adjustments in stone setting.
Halo Rings and Repeating Patterns
Halo diamond rings usually have smaller diamonds surrounding a main stone.
The finished halo could look uneven if the stones around it are of substantially different diameters.
Large-Scale Manufacturing
Consistently calibrated diamonds help ensure uniform specifications from batch to batch.
A melee diamond size chart can be a starting point for placing an order, but it is important for suppliers and manufacturers to agree on the dimensional tolerances that will be applied in actual production before production commences.
This is especially important when buying stones for standard jewelry components or restocking current inventory.
Wholesale Diamond Buyer Melee Diamond Size Chart
There’s more to buying in bulk than simply selecting a nominal diameter.
A melee diamond size chart should be supported by checks that cover the following factors:
- Diameter range: Check the minimum and maximum allowable measurements in millimetres.
- Average carat weight: Compare estimated weights with measured parcel weights.
- Sorting by screening: Check the physical sieve openings of the supplier.
- Consistency of cut: Check to see if the parcel has a fairly uniform cut style.
- Colour and clarity: Check the quality range agreed for the whole lot.
- Diamond source: Indicate if the order is for natural or lab-grown diamonds.
- Quantity and total weight: If the production schedule is based on a projected stone count, check both numbers.
Buyers who want to buy wholesale melee diamonds should also pay attention to the way suppliers talk about calibration and parcel consistency.
For melee diamonds purchased in bulk, a clear technical specification will often avoid more confusion than simply referring to the carat weight.
Lepdo Diamonds is a B2B supplier and manufacturer of lab-grown diamonds based in Surat, India. Lab-grown melee follows the same relationships of dimensions and mass as natural diamonds of similar cut and proportions.
Top Mistakes to Avoid Using a Diamond Melee Size Chart
Even when using a good melee diamond size chart, misunderstanding the measurements can lead to wrong buying decisions.
Confusing Weight With Diameter
A 2.00 mm diamond does not weigh the same as all the other 2.00 mm diamonds.
Its true weight depends on the whole stone in three dimensions.
Treating Sieve Numbers as Universal
Different suppliers use different sieve number systems.
Always physically check the actual millimetre dimensions. Never trust the number designation alone.
Ignoring Measurement Tolerance
For example, a parcel may be described as 1.50 mm but contain stones within an agreed range of that size, rather than diamonds all exactly 1.50 mm.
Using Round-Diamond Values for Fancy Shapes
Round brilliant conversions should not be used automatically for oval, pear, princess or baguette diamonds.
For fancy shape diamonds, ask for the length and width measurements as well as the weight.
Assuming a Size Chart Indicates Quality
Measurements won’t tell you if a diamond has the desired colour, clarity or light performance.
For the desired optical appearance, a round brilliant diamond also needs to be cut in proper proportions.
Melee Diamond Size Chart vs. Diamond Carat Chart
A melee diamond size chart is for the small stones that are generally bought in calibrated parcels.
The broader diamond size chart by mm may include larger centre stones and many diamond shapes.
| Feature | Melee Size Reference | General Diamond Size Reference |
| Main purpose | Acquisition of small stones | Overall diamond size comparison |
| Typical measurement | Small diameter bands | Diameter or length and width |
| Estimates of stone count | Usually included | Often excluded |
| Sieving information | May be included | Normally not included |
| Main users | Manufacturers, setters and wholesalers | Retailers, jewellers and consumers |
A general diamond size chart in mm is useful for comparing face-up sizes. The added information on parcels and calibration makes the melee-specific reference more useful for small accent stones.
Frequently Asked Questions
1. What Is a Melee Diamond Size Chart?
A melee diamond size chart compares approximate millimetre diameter, carat weight and stone count of small diamonds. Some references also mention categories of sieve size. It helps buyers and manufacturers of jewelry estimate quantities and choose the right sizes for production.
2. How Much Does a 1.5 mm Melee Diamond Weigh?
A round brilliant diamond about 1.50 mm in diameter will usually weigh about 0.015 carats. The true weight varies with the proportions of the stone. That averages out at about 67 diamonds per carat at that average weight.
3. What Is the Difference Between MM Size and Sieve Size?
The size of a diamond is described in millimetres. Sieve size is a sorting classification determined by the openings of a sieve plate. Millimetre measurements are usually more reliable for inter-supplier specifications as numbered systems vary.
4. Is the Diamond Size Chart for Melee the Same for Lab-Grown and Natural Diamonds?
Yes. Natural and lab-grown diamonds have essentially identical densities, so similar shapes and proportions will have similar diameter-to-carat relationships. Individual differences in cutting proportions still impact the actual weight.
5. How Many 1 mm Diamonds Are in a Carat?
One stone weighs on average 0.005 carat, so about 200 round diamonds of 1.00 mm can have a weight of one carat. The actual quantities depend on the measured average weight of the parcel.
6. What’s a Reference for MM Size of Diamond Melee?
A diamond melee size chart mm reference helps jewelry manufacturers select stone sizes for pavé, halo, accent and repeated jewelry designs. This is especially useful when the size of the setting is more important than the weight of an individual stone.
7. Does a Melee Diamond Sieve Size Chart Work for Every Supplier?
No. The numbering conventions of a melee diamond sieve size chart can vary from supplier to supplier. Buyers should ask for the related millimetre range and check the aperture dimensions before ordering.
8. How Should Wholesale Buyers Use a Melee Diamond Size Chart?
Use a melee diamond size chart as a first guide for wholesale buying, and then confirm the sieve specification, carat weight, required diameter range and quality consistency directly with the supplier.
For in-depth market reports, trade sourcing guides, interactive Q&As, and expert gemological perspectives, join the discussion on Lepdo Diamonds on Quora.
Key Takeout Points for Diamond Buyers
The melee diamond size chart is most useful if you understand each of its three measurements.
Size is specified in millimetres. Carats are a weight measurement. Sieve classifications are useful for sorting diamonds into manufacturing groups.
None of these measurements should be considered a complete replacement for the others, especially by wholesale buyers and jewelry manufacturers.
The preferred method is to first determine the required millimetre sizes, compute carat weight and number of stones, and check actual specifications of the parcel before producing.
Proper sizing allows for consistent jewelry settings, better stock planning and better communication between the diamond supplier and manufacturer.