A carre cut diamond is a square step-cut diamond with four straight sides, sharp corners, and parallel rows of facets. Unlike a princess cut, it produces broad, mirror-like reflections rather than rapid sparkle. Unlike an Asscher cut, it generally retains its corners. Buyers should examine clarity, symmetry, corner condition, and measurements.
A carre cut diamond is a type of square step-cut diamond. Step cuts have vertical facets that resemble stairs, and carré cut diamonds have four 90 degree angles and four straight sides. Reflections from carré cut diamonds are broad rather than flashes like the princess cut.
The arrangement of diamond facets can impact how light is reflected from a diamond, and some cuts of diamonds can favor a flatter reflection as opposed to a sparkle. The carre cut diamond is in the second group of cuts. A uniform and orderly arrangement of facets lends this cut its distinct appearance.
Buyers looking for jewelry inspired by designs from the 1920s and 1930s, or buyers shopping for side stones may find carré cut diamonds relevant. Other buyers may find this style applicable if they are shopping for a design that requires a continuous line of tightly spaced square diamonds. Photographs of square stones may not always show if the stone has step faceting.
Clean silhouettes can be deceiving for a carre cut diamond. Broad facets can actually enlarge flaws or inclusions. Corners, where facets meet, can be vulnerable to chipping. Mounting can help protect corners. Well-proportioned stones that are evenly balanced in their settings are ideal for the individual buyer. For jewelers, well-proportioned stones can also be as important as even reflections.
What Is a Carre Cut Diamond?
A carre cut diamond is a stone which is cut into a tight square with sharp corners and parallel steps. The word carré means square in French. In the diamond trade, carré diamonds are known as square step cuts or sometimes square baguettes. Terms related to this style of cutting often vary. A carré diamond is best identified by its facet pattern, as other variations of this cut often exist.
A carre cut diamond typically has a broad table at the top, a stepped crown, a girdle which outlines the base, and a stepped pavilion below. The lower portion is often closed. Square step cuts are often confused for brilliant-style cuts, but square step cuts largely depend on layered surfaces and faceting to obtain its overall design.
Historical Context
Square step-cuts are often associated with the Art Deco period and geometric designs. One or more aligned square step cuts are often seen in jewelry of that period.
How the Carre Cut Diamond Creates Its Appearance
Four Straight Edges and Sharp Corners
The overall outline of a carre cut diamond is a true square, as each of the four corners are left intact. Length and width of the stone are close enough so that it is read as a perfect square, but a measurement may be necessary when matching a number of stones. A buyer of square step-cut diamond should check the overall faceting of the stone to make sure it is a square step-cut and not a simple brilliant diamond cut.
This design works particularly well for geometric layouts, though the sharp corners make it vulnerable to chipping during setting or wear. Look closely, including when a diamond is mounted.
Step Cuts and Flashes
Step Cut Diamond utilizes rows of elongated facets that generally conform to the edge of the table. On a carre cut diamond, these create a layered square pattern when viewed from the top. As a result, this style produces a sequence of larger light and dark reflections that are more pleasing to the eye than the myriad of small flashes of the brilliant-cut family.
As with all diamond cuts, the finish of a carre cut diamond is affected by the polish and proportions. This must be judged while in motion. Dark patches or facets that appear misaligned or out of place are cause for concern.
Carre Cut Diamond vs Asscher, Princess, Emerald, and Baguette Diamonds
Finally, a carre cut diamond is unique from other comparable cuts like the Princess, Emerald, Asscher, and Baguette cuts.
| Cut | Typical outline | Faceting style | Key visual distinction |
|---|---|---|---|
| Carré | Square, sharp corners | Step cut | Reflections that appear broad and layered |
| Asscher | Square, clipped corners | Step cut | Often octagonal-looking outline and deeper pattern |
| Princess | Square or near-square, sharp corners | Brilliant-style modified cut | Reflections that appear small and lively |
| Emerald | Rectangular, clipped corners | Step cut | Reflections that appear long and parallel |
| Baguette | Slender rectangle | Step cut | Narrow, linear geometry, often used as accents |
With Asscher cut, clipped corners result in an octagonal outline. princess cut sometimes has pointed corners and a more elaborate faceting pattern.
The emerald cut also uses step cutting but tends to be longer and have trimmed corners. The baguette cut also tends to be longer and provides a useful comparison for accents.
All these variations explain why a carre cut diamond should never be picked based on shape alone. Two diamonds can appear square, but behave differently when cut and faceted.
Best Uses of a Carre Cut Diamond in Jewelry
Channel-Set Bands
A carre cut diamond is particularly well-suited for channel-setting due to its sharp angles and the need for repeated squares to appear even. Channel-setting provides a continuous wall of metal to protect the stone, which is particularly important when dealing with sharp edges.
When making a band with a number of stones, jewelry teams must make sure to verify that the outlines are square, the table appearance is consistent, and the dimensions are in exact millimeters. Mixed depths or faceting can appear irregular.
Side Stones and Understated Center Stones
Because the carre cut diamond has a square shape, it can be used as a side stone to a larger center stone, as long as it is set in a step-cut, to create a design and add support without adding overly distracting sparkle. The carre cut can also serve as an understated center stone. It suits the buyer who prefers geometry, clean lines, and measured reflections over a brilliant-style center stone.
As mentioned earlier, the design of a carre cut can also be used to display other irregular and rare diamond shapes, and give designers a chance to see how altering shapes and designs can change the overall look of the jewelry.
Settings That Protect Exposed Corners
A bezel that’s designed properly can outline the shape with metal, and protect edges with a channel. Other settings can also achieve the same effect, but they should be assessed to see if they protect corners.
For a carre cut diamond in an older setting, check to see if there is a protective setting, as exposed corners can easily chip. Make sure to check the corners and setting of the carre cut diamond before and after it was set.
Evaluating a Carre Cut Diamond: 6 Checks
A grading report can provide a lot of useful information, but I find an assessment of the actual cut is more subjective. Use the following checks when you want to evaluate a carre cut diamond for a project or purchase.
1. Actual Shape and Style of the Cut
Confirm that the stone is nearly square (a modified brilliant cut would have more length than width) and has step cuts rather than a brilliant pattern. Request a face-up picture or video to help you identify the cutting style when a report is not available. A generic description of “square” may be too vague.
2. Step Pattern
Look for even outlines and aligned features. Check if elements of the pattern are reflected symmetrically on opposite sides. With fewer elements compared to a brilliant cut, inconsistencies and misalignment can be noticeable.
3. Refracted Light and Dispersion
Examine if the facets are aligned. Compare the reflection pattern on opposite sides. Look for symmetry in the geometry and consider if the cut allows for a clean line of sight. With a modified brilliant cut, the dispersion would be fairly high, but not as sharp or intense as a traditional brilliant cut.
4. Corners and Girdle
Compare the faces, edges, and lines. A true carre cut diamond has four sharp corners. Inspect the stone for nicks, chips, asymmetry and imperfect polish, especially if the stone has been previously mounted.
5. Inclusions
Bear in mind that inclusions are a normal part of a diamond and a high clarity grade does not always guarantee an eye-clean stone. Look at the diamond face up and evaluate if the inclusions would be evident at normal viewing distances.
6. Compare Dimensions and Documentation
When considering single stones, review the measurements for length, width, and depth in conjunction with one another, rather than relying solely on carat weight. For pairs or parcels, matching measurements may impact setting accuracy. When considering certified stones, check that the report correlates to the stone and review the details recorded on the report.
There is no universally agreed upon overall cut-grade scale for every fancy shape. Thus, a carre cut diamond benefits from direct visual inspection, in addition to grading reports available (if any).
What Wholesale Buyers Should Request
From a manufacturing perspective, when sourcing a carre cut diamond, specifying “square step-cut stones” may leave room for variation. The request should stipulate the intended use, an ideal size range in millimeters, the shape of corners, and the desired appearance of faceting.
When requesting paired or repeated stones, specify how the supplier matches length, width, depth, color, clarity, and visible step pattern. A parcel of loose diamonds may contain stones that meet individual grading requirements but do not complement one another. This may be evident prior to setting.
Lepdo Diamonds is a Surat, India-based manufacturer of lab-grown diamonds. When discussing a potential order of a carre cut diamond, requesting a written specification and performing a physical inspection is more advantageous than relying on a name of a cut grade. Availability, matching tolerances and documentation should be confirmed for the specific order.
Typical Misconceptions About This Cut
“Every square diamond is a carré.” The shape describes the outline, not the entire faceting arrangement. A princess cut and a carré can share sharp corners, but a carré can reflect light better and in a different way than a princess cut.
“A step cut should sparkle just like a brilliant.” Again, the optical character is different. A carré-cut diamond generally creates broader flashes.
“Matching carat weights means matching stones.” Weight does not reveal the full dimensions of a face-up stone or the facet arrangement. Stones intended to be matched require both comparison and assessment of the dimensions and visuals.
“Certification guarantees a beautiful result.” A report may confirm some of the characteristics, but visual assessment, among others, of the pattern and the protection of the exposed corners should still be done.
Frequently Asked Questions
1. What Is Another Name for a Carre Cut Diamond?
It is also known as a square step cut. Some sellers use the term square baguette to describe a similar geometry. Be cautious and assume names are not interchangeable, as a report or certificate may not be available for every listing.
2. Is a Carre Cut Diamond the Same as an Asscher Cut?
Not exactly. They are step-cut diamonds, but a traditional carré retains four sharp corners. An Asscher cut may have clipped corners and an octagonal outline. The reflection patterns also may be different. This is something to consider when replacing or matching stones.
3. Does a Carré Cut Diamond Have More Sparkle Than a Princess Cut?
A princess cut diamond will create many smaller, more subtle flashes of sparkle due to its brilliant-style facet arrangement. A carré cut, on the other hand, reflects more of a large, central area, like a giant mirror, and therefore creates large, but less, reflections of light. As far as appearance goes, neither is objectively better. The right choice ultimately comes down to preference and how the buyer wants the diamond to appear in motion.
4. Are Carré Cut Diamonds Suitable for Engagement Rings?
Yes. A carré cut diamond can definitely be used for an engagement ring. A design with a carré cut will generally have sharper corners, so a jeweler will need to explain how their design will support the diamond and corners for everyday use.
5. Can a Carré Cut Be Made From a Lab-Grown Diamond?
Yes. The origin of the diamond has no effect on a diamond’s ability to be cut in a specific way. As long as the rough diamond has the correct dimensions, a lab grown diamond can definitely be cut in a square step cut.
6. Why Is the Carré Cut Diamond Less Common Than Other Square Shapes?
It fills a more specific niche in design. Most customers that are looking for high-intensity sparkle typically lean towards brilliant-style cuts, while those looking for a more geometric step-cut diamond may opt for an Asscher or emerald cut. Just because those cuts are more popular, that doesn’t mean that a carré is inherently worse. It just means that the source and matching may require a more specific request.
7. What Should I Prioritize When Ordering Several Matching Stones?
First, check measurements in millimeters, an even outline, corner conditions, and the consistency of step patterns. Next, check color against the surrounding stones and the metal of the setting. Then check clarity against the surrounding stones. A slight difference in the clarity grade may not be noticeable in the face up view, but a difference in color will.
Practical Takeaways for Buyers
A carre cut diamond has broad reflections of light from stepped facets, resembling other cuts in a square shape from above (i.e. princess or Asscher cuts). The carre cut’s advantage over other cuts is its exact square shape and its ability to allow for a greater variety of more elaborate designs in jewelry.
An ideal carre cut diamond should display a broad reflection of light in a good stepped facet pattern when examined from the side, with good clarity and a good corner condition. It should also be the correct size to fit into the setting. Buyers should be as specific as possible with their requests in order for manufacturers to be able to create consistent designs.